An experimental investigation of the recirculation zone formed downstream of a forward facing step

An experimental investigation of the recirculation zone formed downstream of a forward facing step immersed in a turbulent boundary layer has been undertaken using particle image velocimetry. Bluff body flow is observed with the fixed separation point located at the leading edge of the step. The recirculation region dimensions are characterised over a range of Reynolds numbers (1400–19 000), with Reh based on the step height and the free stream velocity. Turbulent perturbations are produced in the free shear layer which develops between the recirculating flow close to the step and the free stream flow. Contour maps of amplification factor, streamwise perturbation velocity and Reynolds stresses are constructed, providing insight into optimal placement of structures within such topographical features. The mechanisms affecting the reattachment distance, namely the turbulent mixing within the boundary layer and the velocity deficit in the boundary layer, are discussed

Characterisation of a horizontal axis wind turbine’s tip and root vortices

The vortical near wake of a model horizontal axis wind turbine has been investigated experimentally in a water channel. The objective of this work is to study vortex interaction and stability of the helical vortex filaments within a horizontal axis wind turbine wake. The experimental model is a geometrically scaled version of the Tjæreborg wind turbine, which existed in western Denmark in the late 1980s. Here, the turbine was tested in both the upwind and downwind configurations. Qualitative flow visualisations using hydrogen bubble, particle streakline and planar laser-induced fluorescence techniques were combined with quantitative data measurements taken using planar particle image velocimetry. Vortices were identified using velocity gradient tensor invariants. Parameters that describe the helical vortex wake, such as the helicoidal pitch, and vortex circulation, were determined for three tip speed ratios. Particular attention is given here to the root vortex, which has been investigated minimally to date. Signatures of the coherent tip vortices are seen throughout the measurement domain; however, the signature of the root vortex is only evident much closer to the rotor plane, irrespective of the turbine configuration. It is postulated that the root vortex diffuses rapidly due to the effects of the turbine support geometries

Reconstruction of coded aperture images

Balanced correlation method and the Maximum Entropy Method (MEM) were implemented to reconstruct a laboratory X-ray source as imaged by a Uniformly Redundant Array (URA) system. Although the MEM method has advantages over the balanced correlation method, it is computationally time consuming because of the iterative nature of its solution. Massively Parallel Processing, with its parallel array structure is ideally suited for such computations. These preliminary results indicate that it is possible to use the MEM method in future coded-aperture experiments with the help of the MPP

The interaction of helical tip and root vortices in a wind turbine wake

Analysis of the helical vortices measured behind a model wind turbine in a water channel are reported. Phase-locked measurements using planar particle image ve- locimetry are taken behind a Glauert rotor to investigate the evolution and breakdown of the helical vortex structures. Existing linear stability theory predicts helical vortex filaments to be susceptible to three unstable modes. The current work presents tip and root vortex evolution in the wake for varying tip speed ratio and shows a breaking of the helical symmetry and merging of the vortices due to mutual inductance between the vortical filaments. The merging of the vortices is shown to be steady with rotor phase, however, small-scale non-periodic meander of the vortex positions is also ob- served. The generation of the helical wake is demonstrated to be closely coupled with the blade aerodynamics, strongly influencing the vortex properties which are shown to agree with theoretical predictions of the circulation shed into the wake by the blades. The mutual inductance of the helices is shown to occur at the same non-dimensional wake distance

Linking Illness to Food: Summary of a Workshop on Food Attribution

To identify and prioritize effective food safety interventions, it is critical not only to identify the pathogens responsible for illness, but also to attribute cases of foodborne disease to the specific food vehicle responsible. A wide variety of such “food attribution” approaches and data are used around the world, including the analysis of and extrapolation from outbreak and other surveillance data, case-control studies, microbial subtyping and source-tracking methods, and expert judgment, among others. The Food Safety Research Consortium sponsored the Food Attribution Data Workshop in October 2003 to discuss the virtues and limitations of these approaches and to identify future options for the collection of food attribution data in the United States. This discussion paper summarizes workshop discussions and identifies challenges that affect progress in this critical component of a risk-based approach to improving food safety.foodborne illness, food attribution, outbreaks, case-control studies, microbial fingerprinting, microbial subtyping, FoodNet

Breaking an image encryption algorithm based on chaos

Recently, a chaos-based image encryption algorithm called MCKBA (Modified Chaotic-Key Based Algorithm) was proposed. This paper analyzes the security of MCKBA and finds that it can be broken with a differential attack, which requires only four chosen plain-images. Performance of the attack is verified by experimental results. In addition, some defects of MCKBA, including insensitivity with respect to changes of plain-image/secret key, are reported.Comment: 10 pages, 4 figure